Consent renewals, monthly MoEF-approved lab reports, and auto-generated MPCB/TSPCB format compliance reports — backed by live data from your plant, not a paper logbook.
A plant can run perfectly and still attract a notice — a lapsed consent, a missing lab report, a logbook that does not hold up to inspection. Typical manpower contractors leave this burden with you. We take it over completely, and our IoT platform makes the evidence automatic.
We track validity dates, prepare documentation, coordinate with the board, and file renewals before expiry — so your society or facility never operates on a lapsed consent.
Treated water samples are drawn on schedule and tested at MoEF-approved laboratories. Results are filed against your plant's record automatically, building a clean audit trail.
Because our plants stream live data, monthly compliance reports are generated automatically in the board-required format — daily averages, alert logs, operator sign-off — ready to forward.
When a board inspector visits, everything is already in order: logbooks, lab results, consent copies, and live performance data. No scrambling the night before.
Every plant we supply is designed, installed and operated so that the treated output conforms to the standard prescribed by the Central Pollution Control Board and, where applicable, the NGT and the relevant State Pollution Control Board. The applicable standard depends on the stream and the end use, so the tables below set out each case separately. Performance is verified by monthly analysis from a MoEF-approved laboratory.
CPCB / NGT norms for treated sewage reuse. Met by the tertiary PSF + ACF stage.
| Parameter | Standard |
|---|---|
| pH | 6.5 – 9.0 |
| BOD₃ at 27°C | < 10 mg/l |
| COD | < 50 mg/l |
| Total Suspended Solids | < 10 mg/l |
| Total Nitrogen | < 10 mg/l |
| Total Phosphorus | < 1 mg/l |
| Faecal Coliform | < 100 MPN/100 ml |
CPCB general standards under the Environment (Protection) Rules, Schedule VI.
| Parameter | Standard |
|---|---|
| pH | 5.5 – 9.0 |
| BOD₃ at 27°C | 30 mg/l |
| COD | 250 mg/l |
| Total Suspended Solids | 100 mg/l |
| Oil & Grease | 10 mg/l |
| Ammoniacal Nitrogen | 50 mg/l |
IS 10500 : 2012 acceptable limits, delivered by our WTP configurations.
| Parameter | Acceptable limit |
|---|---|
| pH | 6.5 – 8.5 |
| Turbidity | 1 NTU |
| Total Dissolved Solids | 500 mg/l |
| Total Hardness as CaCO₃ | 200 mg/l |
| Iron | 1.0 mg/l |
| Residual free chlorine | 0.2 mg/l min |
Output specifications for our polishing and water treatment plant.
| System | Output | Duty |
|---|---|---|
| Pressure Sand Filter | TSS < 10 mg/l | Reuse polish |
| Activated Carbon Filter | Colour & odour nil | Reuse polish |
| Ultrafiltration | Turbidity < 1 NTU | High-grade reuse |
| Water Softener | Hardness < 5 ppm | Boiler, cooling |
| Organic Waste Composter | C:N and pH within FCO range | Compost |
Tell us your plant capacity and which board you fall under — we'll explain exactly what we take off your plate.